User Manual of Network Camera
156
Figure 12-13 Restore Default Settings
Note:
After restoring the default settings, the IP address is also restored to
the default IP address, please be careful for this action.
12.7.3
Exporting / Importing Configuration File
Purpose:
Configuration file is used for the batch configuration of the camera, which can
simplify the configuration steps when there are a lot of cameras needing configuring.
Steps:
1.
Enter the Maintenance interface: Configuration > Basic Configuration> System >
Maintenance, or Configuration>Advanced Configuration> System > Maintenance
2.
Click
Export
to export the current configuration file, and save it to the certain
place.
3.
Click
Browse
to select the saved configuration file and then click
Import
to start
importing configuration file.
Note:
You need to reboot the camera after importing configuration file.
4.
Click
Export
and set the saving path to save the configuration file in local
storage
.
Figure 12-14 Import/Export Configuration File
Summary of Contents for EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Page 8: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 56: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 147: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...