40
Memory Card Storage
NOTE:
This function is not supported by some models, and may vary with models, please see the
actual model for details. Memory storage is recommended when the camera operates in stand-alone
mode.
Memory card storage is used to save videos and snapshots to the memory card directly.
Manual storage
The camera records live video repeatedly if manual storage is enabled.
1.
Click
Setup
>
Storage
>
Storage
.
2.
Enable memory card storage and modify the settings as required. The following table describes
some major parameters.
Parameter
Description
Storage
Medium
Storage resource type.
Note:
To format the memory card, disable the storage function for the card
first. Then Click
Format
and then click
OK
to confirm the operation. The
system will restart when the format is completed.
Information about the total and free space is displayed.
When Storage
Full
Overwrite: If there is no free space in the memory card, new data will
overwrite the existing data repeatedly.
Stop: If there is no free space in the memory card, new data will not be
saved to the memory card.
Post-Record(s)
When an alarm is raised, the camera is triggered to record live video and
continues recording for a set post-record time after the alarm is cleared.
3.
Click
Save
.
