![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3742173053.webp)
53
Watermark
Use the watermark to encrypt custom information with video to prevent unauthorized deletion or
alteration.
NOTE:
This function is only supported by certain models, please see the actual model for details.
1.
Click
Setup
>
Security
>
Watermark
.
2.
Select
Enable
and set the watermark content.
3.
Click
Save
.
Setting the System Time
You can use the following methods to adjust the system time of your device.
Manually Setting or Synchronizing the System Time
1.
Click
Setup
>
Common
>
Time
, and then click the
Time
tab.
2.
Select Enable for Client Time Synchronization.
3.
Set the correct time zone and system time. You may also click
Sync with Computer Time
to
synchronize the time settings of your camera with that of your PC.
4.
Click
Save
.
Synchronizing with the NTP Server
1.
Click
Setup
>
Common
>
Time
, and then click the
Time
tab.
2.
Select
Sync Mode
to
Sync with
NTP Server
, and then set the IP address and port of the NTP
server update interval.
3.
Click
Save
.