EPLX-SL-PT-3X80W.RD2-TRC-20X-100C
240W Explosion Proof Pole Top AC LED String Light
C1D1/C2D1 - Group B + ATEX/IECEX - 100' SOOW Cord
Instruction Manual
WARNING
TO AVOID THE RISK OF FIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED,
INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN ACCORDANCE WITH ALL
APPLICABLE ELECTRICAL CODES.
TO AVOID ELECTRIC SHOCK:
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
PRODUCT MUST BE CONNECTED TO A WIRING SYSTEM WITH AN EQUIPMENT-GROUNDING
CONDUCTOR.
TO AVOID EXPLOSION:
•
MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.
•
ENSURE THE MARKED T RATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS
ATMOSPHERE.
•
DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON THE PRODUCT
NAMEPLATE.
•
DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR
DAMAGED. IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.
•
ALL FASTENERS SHOULD BE PROPERLY SEATED.
The EPLX-SL-PT-3X80W.RD2-TRC-20X-100C from Larson Electronics is an Explosion Proof Pole Top Mount AC LED
String Light that is a compact powerhouse built to withstand demanding conditions. This LED pole top mount lighting
system features three, state-of-the-art AC LEDs paired with specially designed heat sinks for improved efficiency, thermal
management, and durability. Available in 5000K cool white and 3000K warm white options, a 110° flood beam provides
crisp, and bright illumination with broad coverage. Line-in power is facilitated by a 100' 16/3 SOOW cord with an explosion
proof cord cap.
Mounting
The EPLX-SL-PT-3X80W.RD2-TRC-20X-100C pole top slip
fit mount explosion proof LED string light features adjustable
swivel brackets constructed of 3/8" aluminum that allows
over 270° of adjustment and are attached to slip fit yokes for
easy installation. The slip fit yoke is built to customer's
specs, enabling operators to mount this explosion proof LED
lighting system to their specific pole size. Slip each light over
it's mount pole, and tighten the T-handle screw to secure in
place. Set vertical angle using adjustment holes on the sides
of the swivel brackets to aim the lights where desired.
Power
This explosion proof LED string light is equipped with 100 feet of 16/3 SOOW line-in cord that is fitted with an explosion
proof cord cap for easy connection to explosion proof outlets.
We strongly encourage a licensed electrician install this product,
in all locations, especially in outdoor areas where
weatherproofing may be required.
Warning:
Check product label for correct input voltage!
This unit comes pre-wired from the factory with the selected cord cap. Take precautionary steps for weatherproofing all
connections if installed in a location where water may come in contact with the unit. All outdoor installations and indoor
installations near a wet location require the use of a GFCI device for safety, according to the National Electrical Code®
(NEC). Ensure the unit is properly grounded.
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
2
