Larson Davis SoundTrack LxT, User Manual

Page: 198 / 307

LxT Manual Technical Specifications A-1
A P P E N D I X
A
Technical Specifications
The specifications contained in this chapter are subject to change without notice. Please refer to
calibration and measurement results for data on a specific unit.
Standards Met by LxT
The SoundExpert LxT

meets the same standards as the LxT1.
The LxT meets the specifications of the following standards:
Instrument LxT1 LxT2
Sound Level Meter Standards IEC61672-1 (2013-09) Class 1, Group
X
IEC60651 (2001) plus Amendment 1
(1993-02) and Amendment 2 (2000-
10) Type 1, Group X
IEC60804 (2000-10) Type 1, Group X
ANSI S1.4-2014 Class 1
ANSI S1.4-1983 (R 2006) plus
Amendment S1.4A-1985 (R 2006),
Type 1
ANSI S1,43-1997(R2007), Type 1
DIN 45657
IEC61672-1 (2013-09) Class 2, Group
X
IEC60651 (2001) plus Amendment 1
(1993-02) and Amendment 2 (2000-
10) Type 2, Group X
IEC60804 (2000-10) Type 2, Group X
ANSI S1.4-2014 Class 1
ANSI S1.4-1983 (R 2006) plus
Amendment S1.4A-1985 (R 2006),
Type 2
ANSI S1,43-1997(R2007), Type 2
DIN 45657
Octave Filter Standards
(Options OB1 or OB3 only) IEC61260 Ed. 1.0 (1995-08) plus
Amendment 1 (2001-09), 1/1 and 1/
3-octave Bands: Class 0, Group X,
all filters using a 377B02 or 377C20
microphone. Otherwise, Class 1
ANSI S1.11-2004 (R2009) Class 1
IEC61260 Ed. 1.0 (1995-08) plus
Amendment 1 (2001-09), 1/1 and 1/
3-octave Bands: Class 0, Group X,
all filters using a 377B02 or 377C20
microphone. Otherwise, Class 1
ANSI S1.11-2004 (R2009) Class 1
Personal Noise Dosimeter
Standards IEC61252 Ed. 1.1 (2002) Type 1
ANSI S1.25-1991 (R2007) Class 1 IEC61252 Ed. 1.1 (2002) Type 2
ANSI S1.25-1991 (R2007) Class 2
Safety Requirements for
Electrical Equipment for
Measurement, Control and
Laboratory Use IEC61010-1 Ed. 2.0 (2001-02) IEC61010-1 Ed. 2.0 (2001-02)
Table A-1 Standards Met by LxT