SoundAdvisor Model 831C
Available Options and Accessories
1-6
831C-SR
Make event based and manual sound recordings in WAV or OGG format that
can be sent via email or SMS and stored in the measurement data.
831C-MSR
Measurement History for the manual or timed storage of statistical data with
all sound recording capabilities.
831C-SW
Make direct USB communication with Sierra Wireless RV50X cellular gateway.
831C-AUD
Using the AudCal software from Larson Davis in conjunction with your
SoundAdvisor 831C enables you to test the calibration of audiometers and
sound booths.
831C-SCH
Accounts and scheduling feature for G4 LD Utility.
1.6.2 Hardware Options
The following table contains only a few examples of the hardware accessories
available for your 831C. Additional components include, but are not limited
to, microphones, preamplifiers, software, power supplies, tripods, calibrators,
sensors, protective cases, adapters, and cables. For a complete listing of
standard and system accessories, see
http://www.larsondavis.com/
products/soundlevelmeters/soundadvisor/soundadvisorordering.
Table 1.2
Accessory Type
Available Options
Microphone Options
Note:
These mics are available
directly from Larson Davis. You
can also use other
microphones with the 831C.
(377A15)
1-inch, prepolarized
pressure condenser microphone,
50 mV/Pa, providing performance
conforming to Class 1 sound level
meter standards
(377B01)
¼-inch free-field
prepolarized microphone, 50 mV/
Pa, providing performance
conforming to Class 1 sound level
meter standards
(377B10)
¼-inch free-field
prepolarized microphone, 50 mV/
Pa, providing performance
conforming to Class 1 sound level
meter standards
(377C01)
¼-inch free-field
prepolarized microphone, 50 mV/
Pa, providing performance
conforming to Class 1 sound level
meter standards
(377C13)
½-inch, prepolarized,
pressure condenser
microphone, 50 mV/Pa,
providing performance
conforming to Class 1 sound
level meter standards
(377C10)
¼-inch free-field
prepolarized microphone, 50 mV/
Pa, providing performance
conforming to Class 1 sound level
meter standards
