Larson Davis HVM100, Manual

Page: 46 / 174

4-2 HVM100 User Manual 4/11/03
The selections for the gain will be either 0, 20, 40, or 60 dB.
Once the gain selection is stable, press the
c
key to save the
settings. The HVM100 must be stopped and reset before the
Auto-Range function can be used.
Gain X, Y, Z
Hint: This setting is in the Range menu. To access the Range menu press the
RANGE key and then use the
u
and
d
arrow keys to navigate
through the menu items.
The Gain settings in the HVM100 will perform manually
what the Auto-Range setting did automatically. You can
select one channel at a time, and manually assign a gain set-
ting to that channel. The choices are 0, 20, 40, or 60 dB.
NOTE: To view each selection, first press
the
c
key, and then press the
r
or
l
arrow key to scroll through each selec-
tion.
To set the Gain for the X channel, first press the
RANGE
key to open the Range menu. Next press the
d
arrow key
once to view the Gain X parameter. Press the
c
key to enter
the change mode, use the
r
or
l
arrow keys to select the
desired value, and press the
c
key again to confirm the
change. The Gain Y and Gain Z displays are located just
below the Gain X display. (From the Gain X display press
the
d
arrow key once to view the Gain Y display. Press the
d
arrow key again to view the Gain Z display.)
G a i n X
4 0 d B