Larson Davis HVM100, Manual

Page: 41 / 174

4/11/03 Tools Menu 3-11
To clear all setups:
NOTE: To view each selection, first press
the
c
key, and then press the
r
or
l
arrow key to scroll through each selec-
tion.
Step 1 Go to the Erase Setups menu item.
Step 2 The following screen will appear. Press the
c
key.
The ‘No’ will start to flash. Press the
r
key to
change the screen to ‘Yes’.
Step 3
The following screen will now be showing and the
‘Yes’ will be flashing. Press the
c
key to erase the
setups.
Step 4 After pressing the
c
key, the screen displays the
following message. The display will return to the
Erase Setups screen after about 3 to 10 seconds.
All Setups have now been cleared from the setup registers.
Header 1,2,3
Hint:
This setting is in the Tools menu. To access the Tools menu press the
TOOLS
key and then use the
u
and
d
arrow keys to navigate
through the menu items.
The HVM100 has 3 Heading information screens. This will
allow you to enter descriptive information into the instru-
ment, that will then be printed out with the reports. The
information can be up to 16 characters in length in each
screen.
E r a s e S e t u p s
N o
E r a s e S e t u p s
Y e s
A l l E r a s e d
E r a s e S e t u p s
N o