Larson Davis HVM100, Manual

Page: 40 / 174

3-10 HVM100 User Manual 4/11/03
To clear all files:
NOTE: To view each selection, first press
the
c
key, and then press the
r
or
l
arrow key to scroll through each selec-
tion.
Step 1 Go to the Erase All Files menu item.
Step 2 The following screen will appear. Press the
c
key.
The ‘No’ will start to flash. Press the
r
key to
change the screen to ‘Yes’.
Step 3
The following screen will now be showing and
the’Yes’ will be flashing. Press the
c
key to erase
the files.
Step 4 After pressing the
c
key, the screen will display
the following message. After about 3 seconds the
display will return to the Erase All Files screen.
All file registers have now been cleared.
Erase Setups
Hint:
This setting is in the Tools menu. To access the Tools menu press the
TOOLS
key and then use the
u
and
d
arrow keys to navigate
through the menu items.
The HVM100 has the ability to store 10 setups internally in
the memory. This is accomplished, as explained later in the
manual, by pressing the
STORE
key while in the setup
menu. The Erase Setups command is used to clear all of the
stored setups from the setup registers.
E r a s e A l l F i l e s
N o
E r a s e A l l F i l e s
Y e s
A l l E r a s e d
E r a s e A l l F i l e s
N o