LT-3100S GMDSS User & Installation Manual Rev. 1.02
Unpacking (in-the-box)
Lars Thrane A/S
www.thrane.eu
Page 2 of 71
Unpacking (in-the-box)
Unpack the LT-3100S GMDSS Satellite Communications System
–
Basic (P/N: 90-102071) and check that the
following items are present in the box:
•
51-101812 LT-3110S Control Unit
•
51-100988 LT-3120 Handset
•
51-101181 LT-3121 Cradle
•
51-100989 LT-3130 Antenna Unit
•
91-100771 Bracket Mount, Control Unit
•
91-102118 Power Cable, 3m
•
4 x Stainless steel A4 screws (for Bracket Mount, Control Unit)
•
2 x Stainless steel A4 screws (for Cradle)
•
4 x Unit Test Sheets
•
95-101817 LT-3100S GMDSS User & Installation Manual
NOTE
:
Antenna unit mounts (bracket and pole mount) are not included in the LT-3100S GMDSS
Satellite Communications System
–
Basic (P/N: 90-102071) and must be ordered
separately. The antenna unit must only be mounted, using the bracket or pole mounted,
delivered by Lars Thrane A/S. The antenna unit mounts are listed with part numbers (P/N)
in
on page 3.
Inspection
Inspect the shipping cartons and/or wooden box immediately upon receipt for evidence of damage during
transport. If the shipping material is severely damaged or water stained, request that the carrier's agent be
present when opening the cartons and/or wooden box. Save all box packing material for future use.
After unpacking the system and opening the cartons, inspect it thoroughly for hidden damage and loose
components or fittings. If the contents are incomplete, if there is mechanical damage or defect, or if the
system does not work properly, notify your dealer.
WARNING:
To avoid electric shock, do not apply power to the LT-3100S GMDSS system components if
there is any sign of shipping damage to any part of a unit or the outer cover. Read the Safety
Instructions at the front of this manual before installing or operating the unit.
