Lapple FIBRO FIBROTOR VM.NC, Assembly And Operation Manual

Page: 33 / 50

9 REPAIR
9.1 IMPORTANT SAFETY GUIDELINES
FIBROTOR 33 | 50
9 Repair
9.1
Important safety guidelines
Unauthorised personnel
The personnel of the operator may perform only the maintenance work described
in this manual. This personnel must be trained and authorised for performing these
activities. The action area of the moving machine parts must be secured. All other
work and repairs must be performed by FIBRO personnel only. The use of
unauthorised personnel can lead to injuries resulting from incorrect action.
Using wrong spare parts
Using the wrong spare parts or materials can endanger the safety of the rotary
table. Only spare parts from our spare parts list or spare parts released for use by
us can be used. No individual components may be exchanged with each other.
Only the specified materials must be used. The self-locking bolts and nuts must be
always replaced with new ones. All prescribed tightening torques must be adhered
to exactly as specified. Failure of unapproved spare parts can cause injuries.
Missing safety devices
Under certain circumstances, safety devices may have to be removed when
maintenance work is performed. The removed parts must be reassembled
immediately after completing the maintenance work. The protection function must
be tested. Operation of the machine without safety devices is prohibited. Operation
of the machine without the safety devices can cause serious or fatal injuries.
Forgotten tools or other objects can fall into the running machine and cause
material damages. Before turning on the machine, check whether there are tools
or other objects on the rotary table. Remove any forgotten tools or other objects.
Prior to performing any maintenance and cleaning work, turn off the main switch
and secure it with a padlock.
Prior to any maintenance work, put warning signs "Do not turn on" or similar
warnings on the main switches and the control consoles.