Lapple FIBRO FIBROTOR VM.NC, Assembly And Operation Manual

Page: 23 / 50

4 TRANSPORT
4.6 PERMITTED EQUIPMENT AND AUXILIARY DEVICES FOR THE TRANSPORT
FIBROTOR 23 | 50
4.6
Permitted equipment and auxiliary devices for the transport
The unloading of the boxes and their transport to the installation site can be
performed with an overhead crane. Use crossbars.
Fig. 4 Transporting boxes
For the transport of the unpacked rotary table, use only suitable attachment eyes.
The use of ring bolts as load suspension devices is not permitted.
4.7
Transport locks
The rotary table can be transported as an individual device
without separate transport locks. In the case of combination layouts transport locks
according to the supplementary sheet must be used.
4.7.1
Unpacking and transporting of the rotary table
1. Unpack the rotary table, and make it freely accessible on all sides.
2. Inspect the rotary table for damage during the transport.
3. Verify the entire delivery scope against the delivery papers.

Request that the established deficiencies be confirmed by the shipping
company and inform FIBRO GmbH thereof immediately.
4. Screw suitable attachment eyes [A] in the screw threads provided on the table
top or housing.