Lapple FIBRO FIBROTOR EM Series, Assembly And Operation Manual

Page: 28 / 72

3 TECHNICAL DESCRIPTION
3.5 ASSEMBLY UNITS
FIBROTOR
28 | 72
3.5.5
Special sealing against dust, dirt and moisture.
For extreme operating conditions with dust, fibre fly, dirt and the effect of water, as
well as intermittent operation in conjunction with frost, the brakes can be delivered in
the following designs (surcharge upon request).

With dust protection ring (4)

With friction disk made of rust-free material (2)

We also recommend this design if the drives have to be stored for an extended
period.
3.5.6
Brake
Use conditions:
The use of the KEB Combistopp is not a problem. A prerequisite is that the size
selection has been made with care and that it is ensured that grease or oil does not
penetrate the friction surface. Moderate dust build-up does not cause damage.
_________________________________________________________________
_________________________________________________________________
Fig. 13 Brake
1 Manual ventilation 6 Cyl. bolt DIN 912 + 6912
2 Setting piece 7 Magnet
3 Second friction surface 8 Anchor
4 Lining 9 Setting ring
5 Hub 10 Pressure bolt
11 Pressure spring
3.5.7
Intermittent operation with special braking motor KOD (Optional)
The max. switching frequency according to the technical data should not be
exceeded.
1
2
3
4
5
7
8
9
10
11
6