Lapple FIBRO FIBROTOR EM Series, Assembly And Operation Manual

Page: 22 / 72

2 SAFETY
2.3 SAFETY DEVICES ON THE MACHINE
FIBROTOR
22 | 72
2.3
Safety devices on the machine
The rotary table is designed for mounting in other machines or for assembly with
other machines. FIBRO GmbH has no control over the intended use of the machine.
The operator is responsible for the safety devices for operation of the machine.
Operation without safety devices is prohibited.
The operator is responsible for the safe operation and the information that is
necessary for the operation.
The operator must take all the necessary measures to protect his personnel against
injuries from the machine.
2.4
Remaining risks
Movement of the table top
The table top turns with high torque. Safety precautions such as, for example,
protective grids, jog mode, two-hand operation, emergency stop button, etc. must
be taken. Do not reach in the path of motion. Danger of crushing.
Explosive atmospheres
The rotary table is not designed for operation in an explosive atmosphere.
Operation in explosive atmosphere or the processing of inflammable substances
can lead to explosion. The operator must take all necessary measures for operating
the rotary table only as intended. An explosion can cause serious to fatal injuries.
Unauthorised changes
Any unauthorised changes or any mounting of additional equipment not approved
by the manufacturer compromise the function of the rotary table and can lead to
dangerous situations. Therefore, any structural changes of the rotary table are
prohibited. The mounting of additional equipment must be discussed with the
manufacturer. Serious injuries or death are possible.