background image

Instruction leaflet

Half Lantern PIR  

Outdoor Wall Light

19/07/2021

172PG, 430PG

•  Fitting/Replacing the bulbs - MAX 15W LED E27 GLS.

•  When changing a bulb, always, switch off at the 

mains and allow the bulb to cool before handling. 
Dispose of used bulbs carefully. Do not exceed the 
wattage stated or use a different shape bulb from 
that indicated on the fitting. 

•  Do not exceed the wattage stated or use a different 

shape bulb from the indicated on the fitting.

•  Unscrew the bulb anti clockwise to remove.

•  Carefully locate the bulb in the lampholder and turn 

clockwise to secure.

Fitting/replacing bulbs

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. 
Check with your Local Authority or retailer for recycling advice. The packaging on this product can also be recycled.

Recycling advice

Safety information

We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could 
damage the finish.

Glass parts – Wipe clean with a damp cloth. Do not use 
abrasive materials as these will damage the finish.

Cleaning

For your safety, always switch off the supply before changing lightbulbs, or cleaning.
The glass shade must be replaced if it becomes cracked or damaged.
Do not use product without glass shade attached.

Replace Cracked

Shade

UK Manufacturer: 

Kingfisher International Products Limited, 
3 Sheldon Square, London, W2 6PX,  
United Kingdom.

EU Manufacturer: 

Kingfisher International Products B.V. 
Rapenburgerstraat 175E,  
1011 VM Amsterdam, The Netherlands. 

The unit must be installed in a vertical position, and fitted 
1-2m above the ground. The PIR sensor can be adjusted 
using the SENS and TIME dials.

The detection angle is set at 105 degrees. The maximum 
detection distance is 8m.

The length of time that the light is on can be adjusted  
by turning the ‘Time’ dial, which can be altered between 
8 seconds to 9 minutes duration. See 

(1) 

below.

Adjust the light level that the lamp switches on by 
adjusting  the 'LUX' screw 

(2)

.

PIR Adjustment

L

N

Max. 8M

1-2M

1.7M

Reviews: