manualshive.com logo in svg

Lantronix xSenso 2100, User Manual, Page: 60 / 92

Share
Download
Lantronix xSenso 2100 User Manual Download Page 60

14: Security Settings

xSenso 2100 User Guide

60

Trusted Authorities

One or more authority certificates are needed to verify a peer's identity. These certificates do not 

require a private key.

To Upload an Authority Certificate

Using Web Manager

To upload an Authority Certificate, go to the 

Admin

 tab/page,

 

click 

SSL

 in the menu and 

select 

Trusted Authorities

.

Using the CLI

To enter the SSL command level:

  enable -> ssl

To enter the Trusted Authorities command level:  

enable -> ssl -> trusted 

authorities

 

Using XML

Include in your file:  

<configgroup name=”ssl”>

and   

<configitem name=”trusted authority” instance =”1”>

and   

<configitem name=”intermediate authority” instance=”1”>

Table 14-7  Trusted Authority Settings

Trusted Authorities 
Settings

Description

Authority

SSL authority certificate. 

RSA or DSA certificates are allowed.

The format of the authority certificate can be PEM or PKCS7. PEM files 

must start with 

“-----BEGIN CERTIFICATE-----

” and end with 

“---

--END CERTIFICATE-----

”. Some Certificate Authorities add 

comments before and/or after these lines. Those need to be deleted 

before upload.

Summary of Contents for xSenso 2100





























































































Reviews:

No comments