7: Analog Settings
xSenso 2100 User Guide
38
To Configure Analog Settings
Using Web Manager
To configure Analog, go to the
Setup
tab/page and click
Analog > Input 1 > Configuration
in
the menu.
Using the CLI
To enter the Analog command level:
enable -> config -> config-analog
Using XML
Include in your file:
<configgroup name=”analog input” instance=”
name
”>
Alarm Type
Select alarm type to enable monitoring for high and/or low analog input readings:
Select either
High
or
High and Low
to enable monitoring for a reading at or above
the specified Alarm High value.
Select
Low
or
High and Low
to enable monitoring for a reading at or below the
specified Alarm Low value.
Input Settings
Description