Lantronix XPW100100K-01, Integration Manual

Page: 16 / 54

2: Functional Description
xPico® Embedded Device Server Integration Guide
16
Table 2-3 xPico (wired) PCB Interface Signals
Signal Name xPico
Pin #
Primary Function Reset
State Internal
Pull-up Driver
Strength
GND 1 Signal Ground
GND 2 Signal Ground
CP8 3 Configurable I/O Input Active 56K
to 122K 4mA
LED1/LINK 4 Ethernet Link LED, active low Output 8mA
RTS1 5 Serial ready to send/ serial
transmit enable Output 2mA
LED0/SPEED 6 Ethernet speed LED, active
low
Output 8mA
RXD1 7 Serial receive data input 1 Input Active 56K
to 122K
LED2/ACTIVITY 8 Ethernet Activity LED, active
low Output 8mA
GND 9 Signal Ground
TXD1 10 Serial transmit data output 1 Output 2mA
TX- 11 Ethernet transmit differential
(neg) Output
TCT 12 Ethernet transmit center tap
TX+ 13 Ethernet transmit differential
(pos) Output
LED3/DUPLEX 14 Ethernet Duplex LED, active
low Output 8mA
GND 15 Signal Ground
CTS1 16 Serial Clear to Send Input Active 56K
to 122K
RX- 17 Ethernet receive differential
(neg) Input
RCT 18 Ethernet receive center tap
RX+ 19 Ethernet receive differential
(pos) Input
SYSTEM_LED 20 System status LED, active
high Input Active 56K
to 122K
4mA
GND 21 Signal Ground
Reserved 22 Reserved for future use. Do
not connect.
RXD2 23 Serial receive data input 2 Input Active 56K
to 122K
Reserved 24 Reserved for future use. Do
not connect.
TXD2 25 Serial transmit data output 2 Output 2mA
CP2/INT 26 Configurable I/O-External
interrupt input
Input Active 56K
to 122K
4mA