5: Configuration Using Web Manager
XPress™ DR+ Industrial Device Server User Guide
34
Network Configuration
The unit’s network values display when you select
Network
from the main menu. The following
sections describe the configurable parameters on the Network Settings page.
Figure 5-2. Network Settings
Automatic IP Address Configuration
An IP address can be assigned automatically. You then enter related network settings.
To assign an IP address automatically:
1.
On the main menu, click
Network
.
2. From the
Network Mode
drop-down list,
Wired Only
is preselected for wired
configuration.
3. Select
Obtain IP address automatically
.
4. Enter the following (as necessary):
BOOTP
Select
Enable
to permit the Bootstrap Protocol (BOOTP) server to assign
the IP address from a pool of addresses automatically.
Enable
is the default
setting.
DHCP
Select
Enable
to permit the Dynamic Host Configuration Protocol (DHCP) to
assign a leased IP address to the XPress DR+ unit automatically.
Enable
is
the default setting.
AutoIP
Select
Enable
to permit the
XPress
DR+
to generate an IP in the
169.254.x.x address range with a Class B subnet.
Enable
is the default
setting.