5: Configuration Using Web Manager
XPress™ DR Industrial Device Server User Guide
29
Apply Settings
1. To save and apply the configuration changes to the device server, click
Apply Settings
.
Note:
Clicking
OK
on each page does not change the configuration on the device. Clicking the
OK
button tells the XPress DR device server what changes to use; the
Apply Settings
button
makes the changes permanent and reboots the XPress DR unit.
Apply Defaults
1. Click
Apply Defaults
to set the device server back to the default settings.
2. Click
Yes
to set factory settings, or click
No
to cancel.
Figure 5-2 Apply Settings and Apply Defaults
