12: Maintenance and Diagnostics Settings
XPort Pro User Guide
108
IP Address Filter
The IP address filter specifies the hosts and subnets permitted to communicate with the XPort
Pro.
Note:
If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list.
To configure the IP address filter:
1. Click
IP Address Filter
on the menu bar. The IP Address Filter page opens to display the
current configuration.
Figure 12-12 IP Address Filter Configuration
Note:
Be aware not to assign your network IP address as "filtered." Doing so will prevent
you from accessing the XPort Pro. You will have to then access the XPort Pro from a
different computer to reset the configuration.
2. Enter or modify the following settings:
Table 12-13
IP Address Filter Settings
3. Click
Add.
Note:
In the Current State table, click
Remove
to delete any existing settings, as
necessary.
IP Address Filter
Settings
Description
IP Address
Enter the IP address to add to the IP filter table.
Network Mask
Enter the IP address’ network mask in dotted notation.
