Lantronix
ION x6010 User Guide
33493 Rev. F
Page 82 of 261
Restoring Standalone Modules
The following procedure describes how to restore the configuration of a standalone module.
IMPORTANT
A restore operation can only be performed for a module that had its configuration file backed up (see
Backing Up Standalone Modules
).
1.
Access the IONMM module through the Web interface (see
“Starting the Web Interface”
).
2.
Select the
BACKUP-RESTORE
tab.
3.
Select the
Restore
sub-tab. The “Modules to Restore” table displays.
4.
In the
Select
column, check the checkbox of the module to be restored.
5.
Is the configuration file to be restored different than the one shown in the
Config File
column?
Yes
No
a)
In the
Config File
column, click the file name.
b)
Type the name of the backup file to be restored.
Note:
the file name must end with
.config
.
c)
Continue with
step 5
.
Continue with
step 6
.
