Lantronix
ION x6010 User Guide
33493 Rev. F
Page 59 of 261
T1
System Configuration – Web Method
1.
Set the x6010 DIP switches and jumpers for your environment. See “
Jumper Settings
” and “
DIP
Switch Settings
”
.
2.
Access the x6010 via the Web interface (see
“Starting the Web Interface”
).
3.
Locate the
System Configuration
section.
4.
In the
System Name
field, enter the name and for the x6010 device. The name can be
alphabetic, numeric or a combination. Do not enter spaces in the
System Name
field.
5.
Enter a
Device Description
of up to 64 characters, as required.
6.
Scroll to the bottom and click
Save
.
7.
Verify the device-level configuration settings:
Serial Number
– e.g., 12345678 (read only field).
Model
– e.g., C6010-3040 (read only field).
Software Revision
– e.g., 1.2.5 (read only field).
Hardware Revision
– e.g., 0.0.1 (read only field).
Bootloader Revision
– e.g., 0.1.1 (read only field).
System Name
– e.g., C6010-3040 (read/write field).
System Up Time
: e.g., 5:5:59:26.00 (read only field).
Configuration Mode
: Hardware or Software (read only field).
Number of Ports
: e.g., 2 (read only field).
Device Description
: blank or as entered (read/write field).
TDM Mod
e: e.g., T1 or E1 (dropdown)