Lantronix
ION x6010 User Guide
33493 Rev. F
Page 58 of 261
System Configuration
The system configuration defines a name for the NID, and (optionally) a Device Description.
The system configuration can be defined via the CLI or the Web interface.
System Configuration – CLI Method
The system information can be alphabetic, numeric or a combination. See “
Section 6: Command Line
Interface (CLI) Reference
”
for individual CLI command details.
1.
Set the x6010 DIP switches and jumpers for your environment. See “
Jumper Settings
” and “
DIP
Switch Settings
”
.
2.
Access the NID through either a USB connection (see
“Starting a USB Session”
) or a Telnet session
(see
“Starting a Telnet Session”
).
3.
Type
set system name
=NAME, where NAME is the new system name, and press
Enter
.
For example:
AgentIII C1|S5|L1D>
set system name=C6010-3040
4.
Verify the new system definition. Type
show card info
and press
Enter
. For example:
AgentIII C1|S5|L1D>
show card info
System name: C6010-3040
Uptime: 21:03:26
Port number: 2
Serial number: 12345678
Config mode: software
Software: 1.2.5
Bootloader: 0.1.1
Hardware: 1.0.0
Agent III C1|S2|L1D>
Note
: the
show card info
command does not function for a Power Supply module
.
