Lantronix
ION x6010 User Guide
33493 Rev. F
Page 109 of 261
Command Descriptions
This section defines the x6010 CLI commands in terms of syntax, descriptions, and examples.
Command
:
Password for Login / Access
Syntax
:
Password:
private
Description
: The default device CLI password. CLI entry requires a successful password entry.
Example
:
Password:
Login incorrect
login:
ION
Password:
private
Hello, this is ION command line (version 1.00).
Copyright 2009 Transition Networks.
AgentIII C1|S1|L1D>
In order to control the NIDs via a USB interface, the command line prompt must be showing the location
of the module to be managed. Use the procedure below to access the NID and login via USB connection.
1. Start the terminal emulator program (e.g., HyperTerminal).
2. When the emulator screen displays, press
Enter
. The login prompt displays. If your system uses a
security protocol (e.g., RADIUS, SSH, etc.), you must enter the login and password required by that
protocol.
3. Type
ION
(all upper case) and press
Enter
. The password prompt displays. If a “Login incorrect”
message displays, ignore it.
4. Type your password. The default is
private
(all lower case).
5. Press
Enter
. The HyperTerminal command line prompt displays (
C1|S3|L1D>
).
6. Enter CLI commands to set up, configure, operate, and maintain the x6010.
