Lantronix
ION x6010 User Guide
33493 Rev. F
Page 105 of 261
Firmware Upgrade File Content and Location
The table below shows file content and location resulting from a firmware upgrade.
Table 11: File Content and Location after a Firmware Upgrade
File Type
Filename
File Description
Stored Directory
Lost after
Firmware
Upgrade?
(Y/N)
Provisioning
backup files
e.g.,
‘1-1-IONMM.config’
These files are only
used by provisioning
Restore
/tftpboot
Yes
MIB 105con-
figuration files
e.g.,
‘agent3.conf’
‘ifMib.conf’
The MIB configura-
tion files for SNMP
setting
/agent3/conf
No
Additional Upgrade Procedures
Additional upgrade procedures are available for the ION system. Refer to the
IONMM User Guide
for
these IONMM upgrade procedures:
•
Upgrade the IONMM and/or NID Firmware.
•
Upgrade Slide-In and Remote Modules Firmware via TFTP. This procedure is used to upgrade
one or more of the slide-in modules installed in the ION Chassis or a remote module connected
to a slide-in module. Requires you to 1) Create Database Index and Archive Files, and 2) Perform
the Module Firmware Upgrade.
•
Perform the Module Firmware Upgrade – the upgrade consists of two parts: uploading the ar-
chive file to the IONMM, and then loading the upgrade file into the appropriate modules. This
procedure is for upgrading the ION system modules.
