4: Configuration Using Web Manager
WiPort Embedded Wireless Device Server User Guide
29
4. On the main menu, click
Apply Settings
.
Host List Configuration
The WiPort scrolls through the host list until it connects to a device listed in the host
list table. After a successful connection, the unit stops trying to connect to any others.
If this connection fails, the unit continues to scroll through the table until the next
successful connection.
The host list supports a minimum of 1 and a maximum of 12 entries. Each entry
contains an IP address and a port number.
Note:
The host list is disabled for Manual and Modem Mode. The unit will not
accept a data connection from a remote device when the hostlist option is
enabled.
To configure the WiPort’s host list:
1. From the main menu, click the
Hostlist
tab.
Figure 4-5. Hostlist Settings
2. Enter or modify the following fields from the Hostlist Settings window:
Retry Settings
Retry Counter
Enter the value for the number of times the WiPort should
attempt to retry connecting to the host list.
Retry Timeout
Enter the duration (in milliseconds) the WiPort should
abandon attempting a connection to the host list.
Host Information
Host Address
Enter or modify the host’s IP address.
Port
Enter the target port number.
