CONFIGURE IP ADDRESS CON’T.
d) Change Telnet Configuration Password: change the Telnet configuration
password to prevent unauthorized access to the Setup Menu.
e) Change DHCP Device Name: change the DHCP name if desired.
6
W W W . L A N T R O N I X . C O M
Q u i c k S t a r t G u i d e
W i B o x 2 1 0 0
7
CONFIGURE IP ADDRESS
Two configuration options must be set for the WiBox to communicate on a
wireless network:
1. The Server (0) settings
2. The WLAN (4) settings
Current settings are displayed in parentheses.
1. To configure the Server settings, select 0 from the Change Setup menu and
edit the following fields:
a) IP Address: the IP address must be set to a unique value in the network.
Input each octet and press Enter between each section inputted.
b) Set Gateway IP Address: the gateway address should be the IP address of
the router connected to the same LAN segment as the WiBox unit.
c) Netmask: the netmask defines the number of bits taken from the IP
address that are assigned for the host part. Enter the number of host bits.
If you leave this blank and press Enter, the WiBox will set the subnet mask
to a standard netmask for the IP address assigned in step a) above.
IP Address: IP Address: (0) (0) (0) (0) _
Set Gateway IP Address (N)? N
Netmask: Number of Bits for Host Part
(0=default)(0)_
Change telnet config password (N) ? _
Change DHCP device name (not set) ? (N) N
2
2