5: Configuration Using Web Manager
UDS2100 Device Server User Guide
31
Figure 5-6. Channel Serial Settings
2.
In the available fields, enter the following information:
Channel 1 (or Channel 2)
Disable Serial Port
When selected, disables communication through the serial
port. The serial port is enabled by default.
Note:
This feature is not available on single port device
servers, since it can only be applied to channel 2.
Port Settings
Protocol
From the drop-down menu, select the protocol type for the
selected channel. The default setting is
RS232
.
Flow Control
Flow control manages data flow between devices in a network
to ensure it is processed efficiently. Too much data arriving
before a device is prepared to manage it causes lost or
retransmitted data.
None
is the default.
Baud Rate
The unit and attached serial device, such as a modem, must
agree on a speed or baud rate to use for the serial connection.
Valid baud rates are 300, 600, 1200, 2400, 4800, 9600
(default), 19200, 38400, 57600, 115200, 230400, 460800, and
921600 baud. The default setting is
9600
.
Note:
Baud rates 460800 and 921600 are available for
selection only when CPU performance mode is set to High."