Lantronix SM12XPA, Install Manual, Page: 37 / 40

Lantronix
SM12XPA Install Guide
33847 Rev. B https://www.lantronix.com/ 37
Standard
: UL 62368-1, 3rd Ed, 2021-10-22 (Audio/video, information and communication technology equipment
Part 1: Safety requirements)
CAN/CSA C22.2 No. 62368-1:19, 3rd Ed, 2021-10-22 (Audio/video, information and communication technology
equipment Part 1: Safety requirements)
Certification Type: Listing
CCN: AZOT, AZOT7 (Audio/video, Information and Communication Technology Equipment)
Complementary CCN: N/A
Rating: 100-240Vac, 4.0A, 50-60HZ (Each Power Supply, 2 Max)
Restricted Access Area: "Equipment is intended for installation in Restricted Access Area" (Instruction) /
“Les matériels sont destinés à être installés dans des EMPLACEMENTS À ACCÈS RESTREINT” (Instruction)
Protective earthing is used as a safeguard: The power supply cord(s) must be plugged into socket-outlet(s) that is
/ are provided with a suitable earth ground.
Optical Transceiver (Optional): Rated DC 3.3 V, Class 1 laser product; Hazard Level 1 Class III.
Optical Transceiver (Optional) (Alternate): 3.3Vdc."CLASS 1 LASER PRODUCT" or equivalent and complied with
CDRH
Declaration of Conformity
Manufacture’s Name : Lantronix, Inc.
Manufacture’s Address : 48 Discovery, Suite 250, Irvine, CA 92618, USA
Declares that the product: SM12XPA
Conforms to the following Product Regulations:
47 CFRFCC Part 15, Subpart B, Class A, ANSI C63.4:2014
UKCA and UL
Standards: EN 62368-1, EN 55032:2015+A11:2020, Class A. CISPR 32:2015+Cor 1:2016, Class A. AS/NZS
CISPR 32:2015, Class A. EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55035:2017 +A11:2020.
Measurement procedures: EN 61000-4-2:2009 / IEC 61000-4-2:2008 ED. 2.0, EN 61000-4-3:2006 +A1:2008
+A2:2010 / IEC61000-4-3:2010 ED. 3.2, EN 61000-4-4:2012 / IEC 61000-4-4:2012 ED. 3.0, EN 61000-4-5:2014
+A1:2017 / IEC 61000-4-5:2017 ED. 3.1, EN 61000-4-6:2014+AC:2015 / IEC 61000-4-6:2013 ED. 4.0, EN 61000-
4-8:2010 / IEC 61000-4-8:2009 ED. 2.0, EN 61000-4-11:2004 +A1: 2017 / IEC 61000-4-11:2017 ED. 2.1,
EN 62368-1:2014 +A11:2017
BS EN 55032:2015 +A11:2020, Class A, BS EN 61000-3-2:2014, BS EN 61000-3-3:2013, BS EN 55035:2017
+A11:2020, BS EN 61000-4-2:2009 / IEC 61000-4-2:2008 ED. 2.0, BS EN 61000-4-3:2006 +A1:2008 +A2:2010 /
IEC 61000-4-3:2010 ED. 3.2, BS EN 61000-4-4:2012 / IEC 61000-4-4:2012 ED. 3.0 BS EN 61000-4-5:2014
+A1:2017 / IEC 61000-4-5:2017, ED.3.1, BS EN 61000-4-6:2014+AC:2015 / IEC 61000-4-6:2013 ED. 4.0,
BS EN 61000-4-8:2010 / IEC 61000-4-8:2009 ED. 2.0, BS EN 61000-4-11:2004 +A1: 2017 / IEC 61000-4-
11:2017 ED. 2.1.
With the technical construction on file at the above address, this product carries the CE
Mark
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and
Standards(s).
Place: Irvine, CA
Date: May 24,2022
Signature:
Fathi Hakam
Name: Fathi Hakam
Position: Vice President of Engineering