13: Maintenance
SLC™ Console Manager User Guide
241
nms <SNMP NMS>
oid <SNMP Trap OID>
usbport <U1|U2>
To delete an event:
admin events delete <Event ID>
To view events:
admin events show
LCD/Keypad
The LCD has a series of screens, consisting of 2 lines of 24 characters each. Specific screens and
the display order can be configured. The keypad associated with the LCD can also be configured.
The types of screens include: current time, network settings, console settings, date and time,
release version, location, and custom user strings.
Enabling the
Auto-Scroll LCD Screens
option enables scrolling through the screens and pausing
the number of seconds specified by the
Scroll Delay
between each screen. After any input to the
keypad, the LCD waits until the keypad has been idle for the number of seconds specified by the
Idle Delay
before scrolling of the screens continues.
To configure the LCD and Keypad:
1.
Click the
Maintenance
tab and select the
LCD/Keypad
option.
Figure 13-14 Maintenance > LCD/Keypad
Summary of Contents for SLC8
Page 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Page 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Page 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
