13: Maintenance
SLC™ Console Manager User Guide
223
Figure 13-2 Manage Configuration Files
2.
To delete files, select one or more files and click the
Delete File
button.
3.
To download a new firmware file, click the
Delete File
button.
4.
To rename a listed file, select the file, type the new file name into the
New File Name
field,
and click the
Rename File
button.
Administrative Commands
These commands for the command line interface correspond to the web page entries described
above.
To copy the boot bank from the currently booted bank to the alternate bank (for dual-boot
SLB/SLC units):
admin firmware copybank
To reboot the SLC:
admin reboot
Note:
The front panel LCD displays the "Rebooting the SLC" message, and the normal
boot sequence occurs.
To prepare the SLC console manager to be powered off:
admin shutdown
Note:
When you use this command to shut down the SLC unit, the LCD front panel
displays "Shutting down the SLC console manager," followed by a pause, and then
"Shutdown complete." When "Shutdown complete" displays, it is safe to power off the SLC
unit. This command is not available on the web page.
To list current hardware and firmware information:
admin version
Summary of Contents for SLC8
Page 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Page 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Page 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
