12: User Authentication
SLC™ Console Manager User Guide
180
Figure 12-5 User Authentication > LDAP
2.
Enter the following:
Enable LDAP
Displays selected if you enabled this method on the first User Authentication page.
If you want to set up this authentication method but not enable it immediately, clear
the checkbox.
Server
The IP address or host name of the LDAP server.
Port
Number of the TCP port on the LDAP server to which the
SLC
talks. The default is
389
.
Base
The name of the LDAP search base (e.g., dc=company, dc=com). May have up to
80 characters.
Summary of Contents for SLC8
Page 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Page 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Page 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
