12: User Authentication
SLC™ Console Manager User Guide
170
Figure 12-3 User Authentication > Local/Remote User > Settings
2.
Enter the following information for the user:
Login
User ID of selected user.
Authentication
Select the type of authenticated user:
Local:
User listed in the SLC database.
Remote:
User not listed in the SLC database.
UID
A unique numeric identifier the system administrator assigns to each user.
Valid UIDs are 101-4294967295.
Note:
The UID must be unique. If it is not, SLC console manager
automatically increments it. Starting at 101, the SLC unit finds the next unused
UID.
Listen Ports
The device ports that the user may access to view data using the
connect
listen
command. Enter the port numbers or the range of port numbers (for
example, 1, 5, 8, 10-15).
Data Ports
The device ports with which the user may interact using the connect direct
command. Enter the port numbers or the range of port numbers.
Clear Port Buffers
The device port buffers the users may clear using the
set locallog
clear
command. Enter the port numbers or the range of port numbers.
