8: Device Ports
SLC™ Console Manager User Guide
116
Figure 8-10 Devices > Host Lists
2.
Enter the following:
Note:
To clear fields in the lower part of the page, click the Clear Host List button.
3.
You have the following options:
-
To save the host list without adding hosts at this time, click the
Add Host List
button.
-
To add hosts, enter the following:
Host Parameters
Host List Id
Displays after a host list is saved.
Host List Name
Enter a name for the host list.
Retry Count
Enter the number of times the SLC console manager should attempt to retry
connecting to the host list.
Authentication
Select to require authentication when the SLC unit connects to a host.
Host
Name or IP address of the host.
Protocol
Protocol for connecting to the host (TCP, SSH, or Telnet).
