11: User Authentication
SLB™ Branch Office Manager User Guide
137
Local and Remote Users
The system administrator can configure the SLB device to use local accounts and remote
accounts to authenticate users.
1. Click the
User Authentication
tab and select the
Local/Remote Users
option.
The following page displays.
The top of the page has entry fields for enabling local and remote users and for setting
password requirements. The bottom of the page displays a table listing and describing all
local and remote users.
To enable local and/or remote users:
1. Enter the following:
Enable Local
Users
Select to enable all local users except sysadmin. The
sysadmin is always available regardless of how you set the
check box. Enabled by default.
Authenticate only
users who are in
the remote users
list
Select the check box to authenticate users listed in the
Remote Users
list in the lower part of the page. Disabled by
default.
2. Click the
Apply
button.
To set password requirements for local users: