SISTG10xx-211-LRT-B Quick Start Guide
33758 Rev. B
Page
1
of
2
SISTG10xx-211-LRT-B series Hardened Unmanaged Gigabit
Ethernet Media Converter
Quick Start Guide
The SISTG10xx-211-LRT-B Series is a new generation of unmanaged hardened Gigabit
Ethernet media converter. The converter can provide multimode or single mode fiber
connections with fixed SC connectors for extending Ethernet service distance over fiber.
The converter also has an SFP version that provides the flexibility to choose the
appropriate SFP module to match your communication and distance needs.
See the
Install Guide
for important
Cautions
and
Warnings
, Features, Specifications,
Optional Accessories, Dimensions, Installation, Package Contents, Unpacking, Front
/Back/Top Panels, RESET button, DIP Switch, Mounting, Installing SFPs, Connecting to
Network/Devices, Grounding, Connecting Power, LEDs, Troubleshooting, Regulatory
and Safety Information, and Warranty.
Installation
:
The procedure below assumes that you have already selected an
appropriate install location and have the appropriate equipment needed (e.g., a power
cord, Cat5 or better cable for the TP (RJ-45) port, SC SM, or SC MM fiber cable for FX
(SFP) port).
1.
Unpack and verify package contents.
2.
Review the front, back and top panel information.
3.
Read the DIP switch and RESET button descriptions.
4.
Perform DIN Rail Mounting.
5.
Install SFP Modules.
6.
Connect to Network / Devices.
7.
Connect Fiber cables.
8.
Connect Copper cables and verify Copper cable configuration.
9.
Perform Media Converter grounding.
10.
Connect power wires to the Media Converter Terminal Block.
11.
Provide and attach a Power Cord to the Media Converter.
12.
Connect the Power Cord to the power supply.
13.
Connect the power supply to a live AC outlet.
RESET Button
: The top panel RESET button can be used to reset the Media Converter, clear the MAC address
table, and flash the TP and SFP LNK/ACT LEDs momentarily. Press the RESET button for 2 ~ 7 seconds to reset the
Converter; the green PWR LED lights.
DIP Switch for Feature Selection
: The SISTG10xx-211-LRT-B has a 3-position DIP switch on the top panel used
to configure the Media Converter for use in a particular network setting. See the
Install Guide
for details.
SISTG10
40
-211-LRT-B
SISTG10
13
-211-LRT-B and SISTG10
14
-211-LRT-B
