Lantronix
SI-IES-1x1D-LRT User Guide
33585 Rev. L
Page
16
of
25
Wall Mounting (Optional)
Follow the steps below to mount the SI-IES-1x1D-LRT with the wall mount brackets.
1. Remove the DIN-rail clip from the SI-IES-1x1D-LRT by removing the three mounting screws as
shown below.
2. Place the wall mount brackets on the rear panel of the PoE Injector/Converter.
3. Use the existing screws to install the wall mount plates on the PoE Injector/Converter.
