Lantronix SecureLinx SLK Series, User Manual

Page: 50 / 160

Using the Web Control Interface to Configure the SLK
4-4 SecureLinx SLK Remote KVM User Guide
Understanding the Web Control Interface
The web control interface consists of a menu pane and a main viewing area. The menu
pane is along the left side of the page. It organizes activities into three categories:
❖
Operation — lets you perform various tasks such as controlling and viewing hosts.
❖
Configuration — lets you set up the SLK to suit your requirements. To get the SLK
up and running, you must perform two configuration tasks: specify the SLK network
settings and set up users.
❖
Information — lets you view information such as menu trees or a connection.
Each category contains links to HTML pages in the SLK’s web control interface. These
pages cover all aspects of configuration and operation of the target servers and
attached devices. For a description of these pages, see
Table 4-1 on page 4-6 .
Above the menu pane is a home page icon. You can click this icon to return to the SLK
home page. To the right of this icon is the
Logout button. Click this button to log out of
the current web control interface session.
At the bottom of each page are a Home link for returning to the SLK home page, a
Back link for returning to the previous page displayed, and a Logout link for logging out
of the current session. There is also a link to the Lantronix web site.
Note: In addition to the controls in the web control interface, you can also use the Back
and Forward buttons in your browser to move backward and forward.