Defining Custom Send Keys
9-2
SecureLinx SLK Remote KVM
Custom Key Guidelines
Definitions
❖
[keylist] indicates beginning of document.
❖
[newitem] “Itemname” indicates beginning of item description with “Itemname” being
the descriptor.
❖
[end] indicates end of item description.
❖
[down] indicates depress and hold key commands listed hereafter.
❖
[up] indicates release key commands listed hereafter.
❖
[type] indicates depress and release key commands hereafter.
Requirements
❖
Each key command has to be separated from the next by a space.
❖
The hex equivalent of the key command can be used in its place.
❖
The hex equivalent has to be in the format 0x0041. (See
❖
Upload the file as you would a firmware upgrade, but you do not need to reset the
device.
❖
When loading the new configuration file, make sure all browsers are closed and a
new session is started.
Examples
The following script is an example of creating new keys in a
.jvcf
file:
[keylist]
[newitem] "Ctrl-Alt-Del"
[down] CONTROL ALT DELETE
[up] DELETE ALT CONTROL
[end]
[newitem] "Ctrl-Esc"
[down] CONTROL ESCAPE
[up] ESCAPE CONTROL
[end]
[newitem] "Alt-Esc"
[down] ALT ESCAPE
[up] ESCAPE ALT
Summary of Contents for SecureLinx SLK Series
