Lantronix
S3100 Install Guide
33581 Rev. C
Page 7 of 19
Pre-Installation
CAUTION
: Observe electrostatic discharge precautions when handling the S3100. Failure to observe this
caution could result in damage or failure of the S3100.
Safety
Before installing the S3100, read these “Safety Cautions” and ensure that the requirements noted are
met. During installation and maintenance, avoid direct exposure to laser beams. Specifically, do not look
into laser ports. Ensure that each SFP port at which laser beams are (or will be) present is occupied by
an SFP that is locked in position. See the related SFP manual for details.
See
"Electrical Safety Warnings"
on page
for Electrical Safety Warnings translated into multiple
languages.
Unpacking
1. Carefully unpack all S3100 contents.
2. Verify receipt of all S3100 components; see “
Package Contents
” below.
3.
Place the S3100 and related materials in the desired install location.
4. Save the S3100 shipping carton and packing materials for future use.
Package Contents
The S3100 is shipped with some standard and some optional components. Make sure you have received
the following standard items:
One S3100 device
One AC Power Cord/Adapter
One printed Product Documentation postcard
