16: Maintenance and Diagnostics Settings
PremierWave® XC HSPA+ Intelligent Gateway User Guide
113
Using the CLI
Not applicable.
Using XML
Not applicable.
ARP Settings
Table 16-7 ARP Protocol Stack Settings
To Configure ARP Network Stack Settings
Using Web Manager
To configure ARP protocol settings, click
Protocol Stack
in the menu and select
ARP
.
Using the CLI
To enter the command level:
enable -> config -> arp
Using XML
Include in your file:
<configgroup name=”arp”>
Protocol Stack
ARP Settings
Description
IP Address
Enter the IP address to add to the ARP cache. After entering the MAC address, click
the
Add
button.
MAC Address
Enter the MAC address to add to the ARP cache. After also entering the IP address,
click the
Add
button.
Add (button)
Click the
Add
button after entering the ARP Cache information.
Remove
Click the
Remove
link beside a specific address to remove it.
Remove All
Click the
Remove All
link underneath all listed addresses to remove all the addresses.
