Lantronix
NM2-GXE-2230-xx-01 Install Guide
33724 Rev. D
Page
6
of
18
Specifications
M.2 module naming per specification: 2230-D4-A-E. Key IDs: A and E.
Jumbo frame support:
9014 bytes. PXE boot loader image pre-loaded. Uses standard i210 PROSet drivers from
Intel.
Operating system support:
Windows 10 32/64-bit; Windows 8 and 8.1 32/64-bit; Windows 7 32/64-bit; Linux.
Standards
IEEE 802.3-2012
Bus Slot
M.2 - 2230-D4-A-E, Key IDs: A and E
Data Rate
1000 Mbps (FDX only)
Max Frame Size
9014 bytes
Status LEDs
One Link/Activity LED. LINK/ACT (ON = Link; Flashing = Activity)
Dimensions:
M.2 NIC:
Width: 0.87” [22 mm] x Depth: 1.19" [30 mm]] x Height: 0.12” [3.08 mm]
Fiber Optic Adapter:
Width: 1.65” [42 mm] x Depth: 2.05” [52 mm] x Height: 0.51” [13 mm]
FFC Cable:
Length: 6” (15.3cm) without right-angle bend; 5.5” (14 CM) with right-angle bend
Power Consumption (-LC)
250mA @ 3.3V (0.8 Watts typical)
Power Consumption (-SFP)
120mA @ 3.3V (0.4 Watts typical without SFP module)
Power Source
M.2 interface connector; 3.3V (refer to Table 41 of M.2 specification)
Operating Temp.
0°C to +45°C (+32°F to +113°F)
Storage Temp.
-40°C to +85°C
Humidity
5% to 95% (non-condensing)
Altitude
0 – 10,000 ft.
Weight
0.1 lbs. [0.05 kg]
Compliance
CE Mark; Emissions: EN55032, FCC Part 15; Class A; Immunity: EN55024
Data Speed:
Fixed or SFP optic at 1000Mbs, full duplex only
Fiber Port (-SFP):
1000Base-X open SFP slot
Fiber Port (-LC):
1000Base-SX 850nm multimode (LC); [62.5/125
μ
m fiber: 220 m/722 ft.]; [50/125
μ
m
fiber: 550 m/1804 ft.]; Link Budget: 8.0 dB
DIP Switches / Jumpers:
None
Warranty
Lifetime
