Lantronix Micro125 User Manual Download Page 60 | Manualshive

Page: 60 / 74

background image

9: Setup Mode: Advanced Settings

To configure AES encryption on the Micro125:

Enable Encryption (N) Y
Key length in bits (0): 128
Change Keys (N) Y
Enter Keys: **-**-**-**-**-**-**-**-**-**-**-**-**-**-**-**-

1.

When prompted to enable encryption, select

Y

.

2.

When prompted, enter the encryption key length. The Micro125 supports 128-, 192-, and
256-bit encryption key lengths.

3.

When prompted to change keys, select

Y

.

4.

At the

Enter Keys

prompt, enter your encryption key. The encryption keys are entered in

hexadecimal. The hexadecimal values are echoed as asterisks to prevent onlookers from
seeing the key. Hexadecimal values are 0-9 and A-F.



For a 128-bit key length, enter 32 hexadecimal characters.



For a 192-bit key length, enter 48 hexadecimal characters.



For a 256-bit key length, enter 64 hexadecimal characters

5.

Continue pressing

Enter

until you return to the Change Setup menu.

6.

From the Change Setup menu, select option

9

to save and exit.

Encryption only applies to the port selected for data tunneling (default 10001), regardless of
whether you are using TCP or UDP.

Generally, one of these situations applies:



Encrypted Micro125-to-Micro125 communication. Be sure to configure both Micro125
devices with the same encryption key.



Third-party application to Micro125-encrypted communication: Micro125 uses standard
AES encryption protocols. To communicate successfully, products and applications on
the peer side must use the same protocols and the same encryption key as the Micro125.



Lantronix Secure Com Port Redirector provides an encrypted connection from Windows-
based applications to the Micro125. Information about SCPR is available on our web site,

www.lantronix.com/device-networking/utilities-tools/scpr

. A 30-day trial version of SCPR

is available.

Note:

Developers can license the Lantronix Encryption Library Suite. See

www.lantronix.com/device-networking/utilities-tools.

Enable Enhanced Password

This setting defaults to the

N

(No) option, which allows you to set a 4-character password that

protects Setup Mode by means of Telnet and web pages. The

Y

(Yes) option allows you to

set an extended security password of 16-characters for protecting Telnet and Web Page
access.

Enable Enhanced Password (Y) ? _

Micro125 User Guide

60

«
...
58
59
60
61
62
...
»

Summary of Contents for Micro125











































































Reviews:

No comments

Related manuals for Micro125

Device Server UDS 10

Brand: Lantronix Pages: 8

Brand: National Instruments Pages: 24

Brand: National Instruments Pages: 32

FIELDPOINT FP-1600

Brand: National Instruments Pages: 8

Brand: Patton electronics Pages: 2

ipRocketLink 3086FR

Brand: Patton electronics Pages: 6

Brand: Patton electronics Pages: 16

Brand: Patton electronics Pages: 51

8677 - BladeCenter Rack-mountable - Power...

Brand: IBM Pages: 126

Brand: Conceptronic Pages: 2

Avenue Express Control Panel

Brand: Ensemble Designs Pages: 19

Brand: Vaisala Pages: 32

OptiBond 210 C Series

Brand: i-MO Pages: 16

Brand: FiberHome Pages: 2

Brand: Ubiquiti Pages: 32

Passport WDXML1000UE

Brand: Western Digital Pages: 2

Brand: LevelOne Pages: 61

Brand: Tripp Lite Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands