MatchPort Demonstration Kit Quick Start
10
6. Refer to the
MatchPort User Guide
for information on configuring the
MatchPort using this method.
Install DeviceInstaller
Use DeviceInstaller to configure the IP address and other network parameters.
Note:
You will need a Windows PC running Lantronix DeviceInstaller 4.2 or
higher.
1. Download the latest version of DeviceInstaller from
2. Run the executable to start the installation process
3. Respond to the installation wizard prompts. (If prompted to select an
installation type, select
Typical
.)
Note:
For more information about DeviceInstaller, see theAssign an IP Address
The unit IP address is set for DHCP by default at the factory. The hardware
address is on the product label. Assign a static IP address if you do not want the
network to assign an IP address to the MatchPort or do not have a DHCP server
on the network.
1. Click
Start
Programs
Lantronix
DeviceInstaller
DeviceInstaller
. If
your PC has more than one network adapter, a message appears. Select an
adapter and click
OK
.
2. Click the
Search
icon and select the unit from the list of Lantronix device
servers on the local network. (In case no DHCP server is available, it can
take 30 seconds before an AutoIP address is generated and the unit is
detectable).
3. Click the
Assign IP
icon
.
4. Select Assign a specific IP address and click
Next
.
