Lantronix
LSS2200-8P Install Guide
22
2. Installation
Package Contents
Carefully unpack the contents. Verify that you have received the following items.
Contact your sales representative if any item is damaged or missing. Please save the
packaging for possible future use.
•
One switch
•
Poly bag with a DIN rail bracket, two screws, and four rubber feet.
•
One printed Quick Start Guide
•
One support postcard
Note
: A power supply is required and ordered separately. A second (back-up) power supply is optional (ordered
and packaged separately)
Additional Items
Not shipped but may be required: ESD-preventive cord with wrist strap, wire and wire crimper for chassis
grounding, Ethernet cables, ratcheting torque flathead screwdriver that exerts up to 15 in-lb (1.69 N-m) of
pressure, a #1 and a #2 Phillips screwdriver.
Cautions
:
1.
The switch is an indoor device. If you need to use it to connect outdoor devices such as outdoor IP cameras or
outdoor WiFi Aps with cable, you must install an arrester on the cable between outdoor device and the switch.
Add an arrester between outdoor device and this switch
2.
The marking information is located at the bottom of apparatus (IEC 62368-1).
3.
The equipment is not suitable for use in locations where children are likely to be present.
4.
Restricted access location.