Lantronix EMG 7500, User Manual

Page: 330 / 482

14: User Authentication
EMG™ Edge Management Gateway User Guide 330
To view or update a custom menu:
1. In the Custom Menus table, select the custom menu and click the View Custom Menu
button. The custom menu attributes appear in the lower part of the page.
2. Update the menu attributes following the instructions for adding a menu above.
3. Click the
Edit Custom Menu button.
To delete a custom menu:
1. Select the custom menu in the Custom Menus table.
2. Click the Delete Custom Menu button.
To create a new custom menu from an existing custom menu:
1. Select the custom menu in the Custom Menus table.
2. Enter a name for the new menu in the New Menu Name field.
3. Click the Copy Custom Menu button.
Custom User Menu Commands
From the current menu, a user can display another menu, thus allowing menus to be nested. The
special command
showmenu <Menu Name>
displays a specified menu. The special command
returnmenu
redisplays the parent menu if the current menu was displayed from a
showmenu
command.
The user with appropriate rights creates and manages custom user menus from the command line
interface, but can assign a custom user menu to a user from either the command line or the web
interface.
When creating a custom user menu, note the following limitations:

Maximum of 20 custom user menus

Maximum of 50 commands per custom user menu (
logout
is always the last command)

Maximum of 15 characters for menu names

Maximum of five nested menus can be called.

No syntax checking (Enter each command correctly.)
Go to
Custom User Menu Commands
to view CLI commands which correspond to the web page
entries described above.