Lantronix EDS-MD 16, Command Reference Manual

Page: 714 / 738

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 714
severity log level critical Log only Critical and more severe events.
severity log level debug Log all events.
severity log level emergency Log only Emergency events.
severity log level error Log only Error and more severe events.
severity log level information Log only Information and more severe events.
severity log level none No logging.
severity log level notice Log only Notice and more severe events.
severity log level warning Log only Warning and more severe events.
show Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
show statistics Displays the syslog statistics.
state disable Disables syslog logging.
state enable Enables syslog logging.
write
Stores the current configuration in permanent
memory.
telnet (config-cli-telnet) level commands
authentication disable No password required for Telnet users.
authentication enable Challenges the Telnet user with a password.
clrscrn Clears the screen.
default max sessions
Restores the default maximum allowed concurrent
incoming Telnet sessions.
default port Restores the default local port to the Telnet server.
exit Exits to the CLI level.
max sessions <number>
Sets the maximum allowed concurrent incoming
Telnet sessions. <number> = number of sessions.
port <number>
Sets the local port that the Telnet server uses.
<number> = local port number.
show Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
show statistics Displays the Telnet statistics.
state disable Disables the Telnet Server.
state enable Enables the Telnet Server.
write
Stores the current configuration in permanent
memory.
terminal 1 (config-terminal:1) level commands
break duration <milliseconds>
Sets how long a break should last when it is being
sent to the line. <milliseconds> = number of
milliseconds.
clrscrn Clears the screen.
default break duration
Restores the break duration to the default value
(500 ms).
default terminal type Sets the default terminal type, "UNKNOWN".
echo disable
Disables echoing of characters received on the line
back to the line.
echo enable
Enables echoing of characters received on the line
back to the line.