Lantronix EDS-MD 16, Command Reference Manual

Page: 126 / 738

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 126
default username Sets default Username.
exit Exits to the next higher level.
filename <text> Sets FTP remote Filename.
host <text>
Sets FTP server IP address or hostname to be
connected to.
no host Clears FTP server IP address or hostname.
no password Sets default Password.
password <text> Sets the Password used to logon to FTP server.
port <number>
Sets the Port number which FTP server is listening
to.
protocol ftp Selects FTP Protocol.
protocol ftps Selects FTPS Protocol.
show Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
username <text> Sets the Username used to logon to FTP server.
write
Stores the current configuration in permanent
memory.
connection 2 (config-action-http_post-connection:eth1 link state change:2) level commands
clrscrn Clears the screen.
default port Sets default Port number.
default protocol Sets default HTTP Protocol.
exit Exits to the next higher level.
host <text>
Sets HTTP server IP address or hostname to be
connected to.
no host Clears HTTP server IP address or hostname.
no password Clears the Password.
no url Clears HTTP request URL.
no username Clears the Username.
password <text> Sets the Password used to logon to HTTP server.
port <number>
Sets the Port number which HTTP server is listening
to.
protocol http Selects HTTP Protocol.
protocol https Selects HTTPS Protocol.
show Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
url <text>
Sets HTTP request URL following IP address or
hostname.
username <text> Sets the Username used to logon to HTTP server.
write
Stores the current configuration in permanent
memory.
connection 2 (config-action-ftp_put-connection:eth1 link state change:2) level commands
clrscrn Clears the screen.
default filename Sets default FTP remote Filename.
default port Sets default Port number.
default protocol Sets default FTP Protocol.
default username Sets default Username.