6: Basic Parameters
SLB™ Branch Office Manager User Guide
75
To manage or view status for a Performance Monitoring probe:
1. Click the
Network
tab and select the
Perf Monitoring
option. The following page displays.
Figure 6-7 Network > Perf Monitoring
2. In the upper section of the page, modify the global Performance Monitoring settings:
Number of operations
kept for each probe
Specifies the number of operation set files to keep for each probe. The limit for
Local storage is 50 sets. The limit for external USB is 200 sets. While a probe is
running, the operation set files will be automatically culled to remove the oldest
operation set files.
Repository for
operations
The repository where the operation set files will be kept -
Local
storage, or a USB
thumb drive inserted in the upper
USB Port U1
. The data is stored in individual
directories under a directory called "perfmon". Once probes have been run and
operation set files have been generated, changing the repository will cause all of
the existing files to be moved from the old repository directory to the new
repository directory. It is recommended that the repository only be changed when
probes are not actively running. If external storage is used for the repository, it is
recommended that the external storage device not be removed from the SLB
while probes are actively running.
UDP Jitter Responder
Starts the UDP Jitter responder to reply to UDP jitter or UDP jitter VoIP packets.
The responder will listen on UDP port 1967 for control messages requesting to
start individual responders on a specific UDP port. The SLB UDP jitter responder
can support up to 15 UDP jitter senders.
UDP Echo Responder
Starts the UDP Echo responder on the port configured in
UDP Port
to reply to
UDP echo packets. The SLB UDP Echo responder supports one UDP echo
sender.
When the UDP Echo responder is enabled, the SLB will verify that the responder
UDP port is not being used by any other SLB processes, including port 1967
which is reserved for the UDP Jitter responder.
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...